Coiling Gizmo with 5 long rods
Handle to bend wire with 5 different bores and 5 corresponding rods, Ø 5 / 4 / 3 / 2 / 1 mm
Coinring centering tool incl. 9 stamps
Centering die including 9 punches
Ø 6.35 mm / Ø 7.94 mm / Ø 9.53 mm / Ø 11.12 mm / Ø 14.29 mm / Ø 12.7 mm / Ø 15.88 mm / Ø 14.47 mm / Ø 19.05 mm, wooden support included. Precision tool for exact centering of coins during cutting
Coinring folding Kit
Set of upsetting and stretching
- steel starter cone (to perform the compression)
- universal expanding mandrel (can be used with a mandrel press or a
hydraulic press)
- various upsetting cones - large expanding mandrel - coin ring anvil
Coinring Master Deluxe Kit
Master Deluxe Kit
This kit includes:
- Centering die including 9 punches (does not require spacers)
- Matrix with 17° and 25° degrees cones.
- Set of upsetting and stretching
- Master Swede Kit
- Coin ring manual + three rolls of adhesive tape
Coinring Master swedish wrap kit
Master Swede Kit
With this set you can make the smallest rings of the largest coins.
3 hardened stainless steel rings - 9 bronze stamps - hardened ring carrier - 3 ejectors - 2 rolls of adhesive tape and a tool holder
Coinring reduction dies 17° / 25° incl. 9 stamps
Matrix with 17° and 25° degrees cones.
This is a complete set of universal double-sided upsetting and reducing tools from Ø 17 mm to 40.6 mm openings with an angle of 17° or 25° degrees. These punches can be used with cutting stabilizer cones or mandrels. With this combination, there is no marking on the inside of the coin.
Jump ring mandrel wire wrapping looping
Jump ring mandrel for bending small eyelets, Mandrel 1 : Ø 6.5 / 7.4 / 8.3 / 9.3 / 10.4 / 11mm, Mandrel 2 : Ø 1.7 / 2.6 / 3.5 / 4.6 / 5.5mm
Jumpring Maker 2.5-12.5mm
Jump ring maker system for round rings
20 winding rolls with Ø 2.5 up to 12.5 mm,
coil holder for cutting
Microwaxer Duo with 2 pens incl. 6 tips, 110 - 230V
Microwaxer Duo , wax melting unit with two pens and 6 tips included.Temperature range from 50 up to 200°C, the temperature can be setted for each pen separately, CE conformity.
Ring sizing machine
Ring sizing machine with a revolving steel, reducing plate,
2 x 8 holes, with splitted cone. Weight about 13 kg.
Ring sizing machine w/14 tops
Ring sizing machine with a revolving steel reducing plate and
geared operating handle, 2 x 8 holes and 14 changeable tops from size 6 up to 32 , on wooden plate, about 14 kg.
Spindles oval for 26350
Spindles oval for 26350
7 x 5 / 8 x 6 / 9 x 7 / 10 x 7.5 / 11 x 8.5 / 12 x 9 / 14 x 11 / 16 x 12 /
20 x 15mm
Wire bending plate "Thing-a-Jig" incl. inlets of Ø 2,3,4,5,6 and 8mm
Wire bending plate „Thing-a-Jig“
incl. inlets of Ø 2,3,4,5,6 und 8mm