Aspiration Airbox
Aspiration Mini-Box, electronically controlled, remotable manuel and via the connected consumer inputs, aspiration power remote min./max., with 4 spare filters.
240V/50Hz, dimensions: 28 x 22 x 26cm, weight: 6kg
Aspiration device, 220-240 V, adjustable incl. hose
Aspiration device for - sandblasting machines
- milling machines
- polishers
- micromotors.
Can be neatly stored under the table.
adjustable suction power, 165 m3/h, 2700 l/min.
Dimensions: 31.5 x 23 x 47.5 cm, 59 dB (A), switchable between automatic and manual mode. filter level warning. 13 kg net
Belt sander / handpiece holder max clamp opening 55mm
Beltsander / Handpiece holder
max. clamp opening 55 mm
Belt sander attachement w/o handpiece with 10 different belts
Belt sander attachement without handpiece
with 10 pcs belts in different grains
required handpiece No. 38188
Sandpaper belts No. 52315 - No. 52320
Burnishing barrel 2 x 0,8 litre
Burnishing Twin Barrel, 2 x 0,8 litre
dim. 410 x 165 x 165 mm, weight: 3,7 kg.,
voltage: 240 V/50 Hz
Burnishing barrel Rotabarrel 1x6
Burnishing Barrel „Rotabarrel“, 1 x 6 liter
Dimensions 40 x 30 x 57 cm, weight: 18 kg, 240 V/50 Hz
speed 42 rpm
Optional: Can be used with 2 x 3 liter barrel
Burnishing barrel Rotabarrel 2x3
Burnishing Barrel „Rotabarrel“, 2 x 3 liter
Dimensions 40 x 30 x 57 cm, weight: 18 kg, 240 V/50 Hz
speed 42 rpm
Clean San cleaning agent , concentr. 1L
Clean San is suitable for all polishing, ultrasonic cleaning, surface cleaning, denture cleaning and descaling. Removes easily:
- Flux and oxide layers - Plaque on dentures - Natural plasters, investments, alginates
- Gypsum, lime and other dirt
- for trimmers, decanter, mixing bowls, spoons impression, 1:10 to descale - Steam cleaners
(unscrew the nozzle before) - (Wash in cold) wax extraction - Water Heater
Clean San is free of phosphorus and hydrochloric acid. (Does not affect surfaces and is
non-corrosive!). Product composition: mineral acid and surfactants.
Cleaning agent for needle, 500ml
removes easily deposits on the needles, such as oxide,
- apply, when the needles no longer whirl properly
Collet holder for 22050 (2.34) for right side only
Collet holder for No. 22050 (2.34), for the right side only
ECO-Mini dry polishing trum
ECO mini dry polishing drum
Easy to use with timer, with fine granule for dry polishing, works
very silently, no dust, measure 210 x 225 x 345 mm,
240 V / 50 Hz
Exhaustor SWISS-VAC
Very strong aspiration, with fine filter inside. Fit for sandblasters,
exhaustors etc. Swiss quality, made in stainless steel. It is possible to switch from suck or blow. Aspiration regulation from 0 - 100 %. Incl. 1,5 m tube, one filter. Ø 200 mm, 395 mm high, contents 6 liters,connection 240V/50Hz, capacity 850 watts, 42 liter air/sec, about 4,7 kg.